Abstract:
Flow   measurements   in  mountainous   areas   are   comparatively   difficult   and   need   a   special   attention.   Stream flow is   the   combined   result   of   all   the   climatological   and   geographical   factors   that   operate   in  the   drainage   basin.   Variations   of   these   conditions   in   India   are   very   wide   in   the range  pertaining  to  East  to  West  or  south  to  North.  A  general feature   of   Indian   mountain   streams   is   the   high   velocity of   flow. These   are   often   deep-gorges   or   shallow   channels with   an   uneven   bed;   carry   stones,   pebbles   and   high   sediment load; have   transverse,   rocky/unstable   slopes,   high   density of   confluencing   flow   and   uneven   water   surface   or   ice   cover conditions   in  winter.   Consequently   stations   in  arid  or  forested   zones   require   to   be   designed   to  measure   flows   from   zero to   major   floods   whereas,   glacier-fed   stream   requires   to be   designed   for   pulsating,   perennial   and   ice   covered   flows to  flash floods. 
Flow  measuring   equipments   and   methods   applicable for mountainous	stream	have been   indicated   and   discussed in   this   report.   Review   presents   the   scope,   the   limitations with   relevant	 recommendations	 in	adopting   velocity-area, dilution
gauging,	 control structures,	gauge   measurement, slope-area,   and   electromagnetic methods   and   their   instrumentation   based   on	 local	condition,	accuracy   required   and maintenance   possible	in	remote   areas. The	application   of telemetering   system  in   remote  and  application  of  unconventional ,   specially  designed  and   portable  gauges   for  flow  measurement  during  expeditions  are  highlighted. 
Part   of   the   table   prepared   by  WMO	(TN-337)   on   the instruments   of   proven   reliability   and   appropriate   to   this report   are   listed   in   Appendix   II.   For   measurement   of   open channel  flow,   International  and  Indian  Standards  are  available with  reference  to  instruments  and  techniques  only,   and  listed in   Appendix   I.   It   is   required   to   standardize   the   methods of   observation   and   instrumentation   for   flow   measurement in   Indian   mountainous   areas,   based   on   climate   and   local conditions   which   are   yet   in   the   process   of   development   in the  world.